<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>2518-4431</journal-id>
<journal-title><![CDATA[Investigación & Desarrollo]]></journal-title>
<abbrev-journal-title><![CDATA[Inv. y Des.]]></abbrev-journal-title>
<issn>2518-4431</issn>
<publisher>
<publisher-name><![CDATA[UNIVERSIDAD PRIVADA BOLIVIANA]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S2518-44312024000100121</article-id>
<article-id pub-id-type="doi">10.23881/idupbo.024.1-10i</article-id>
<title-group>
<article-title xml:lang="es"><![CDATA[LA IMPRESIÓN 3D EN LA CREACIÓN DE ESTRUCTURAS DE CUBESATS FRENTE A LOS MATERIALES CONVENCIONALES]]></article-title>
<article-title xml:lang="en"><![CDATA[3D PRINTING IN THE CREATION OF STRUCTURES CUBESATS VS. CONVENTIONAL MATERIALS]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Soliz]]></surname>
<given-names><![CDATA[Jorge]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Cuiza]]></surname>
<given-names><![CDATA[Mishel]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,Universidad Privada Boliviana Ingeniería Electrónica y Telecomunicaciones ]]></institution>
<addr-line><![CDATA[ ]]></addr-line>
<country>Bolivia</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>00</month>
<year>2024</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>00</month>
<year>2024</year>
</pub-date>
<volume>24</volume>
<numero>1</numero>
<fpage>121</fpage>
<lpage>129</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://www.scielo.org.bo/scielo.php?script=sci_arttext&amp;pid=S2518-44312024000100121&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.bo/scielo.php?script=sci_abstract&amp;pid=S2518-44312024000100121&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.bo/scielo.php?script=sci_pdf&amp;pid=S2518-44312024000100121&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="es"><p><![CDATA[RESUMEN Con la creación del CubeSat se marcó el inicio de un creciente interés en la exploración de tecnologías espaciales. El CubeSat es una estandarización que tiene el propósito de reducir costos y tiempos de producción de satélites, permitiendo el acceso al espacio a universidades o grupos de investigación que cuentan con recursos científicos para experimentar nuevas tecnologías y facilitar la investigación aeroespacial. A lo largo de los años, se han mejorado aspectos clave, como la miniaturización de componentes, sistemas de propulsión, eficiencia energética y comunicación. Sin embargo, persisten desafíos en la robustez espacial, costos y longevidad operativa, por lo que la selección adecuada de materiales es esencial porque deben soportar las condiciones extremas del espacio. La impresión 3D ha ganado protagonismo en la industria espacial, aunque, se ha explorado su potencial en aplicaciones aeroespaciales, su adopción en CubeSats todavía enfrenta desafíos. Mediante una revisión sistemática de literatura se buscó comprender el impacto de la impresión 3D en las estructuras de CubeSats frente a materiales convencionales, comparando sus propiedades clave frente a las condiciones del espacio. Los resultados destacaron la flexibilidad y personalización que ofrece la fabricación tridimensional, pero también señalaron las ventajas de los materiales convencionales en resistencia mecánica. La fabricación aditiva está transformando la industria espacial, la elección entre la impresión 3D y materiales clásicos dependerá de las necesidades de la misión espacial.]]></p></abstract>
<abstract abstract-type="short" xml:lang="en"><p><![CDATA[ABSTRACT The creation of the CubeSat marked the beginning of a growing interest in space technology exploration. CubeSat is a standardization aimed at reducing satellite production costs and lead times, enabling access to space for universities or research groups with scientific resources to experiment with new technologies and facilitate aerospace research. Over the years, key aspects such as component miniaturization, propulsion systems, energy efficiency, and communication have been improved. However, challenges persist in space robustness, costs, and operational longevity, making the proper selection of materials essential as they must withstand the extreme conditions of space. 3D printing has gained prominence in the space industry, although its potential in aerospace applications has been explored, its adoption in CubeSats still faces challenges. Through a systematic literature review, the impact of 3D printing on CubeSat structures compared to conventional materials was investigated, analyzing their key properties against space conditions. The results highlighted the flexibility and customization offered by three-dimensional manufacturing, but also underscored the advantages of conventional materials in mechanical strength. Additive manufacturing is transforming the space industry, and the choice between 3D printing and classical materials will depend on the needs of the space mission.]]></p></abstract>
<kwd-group>
<kwd lng="es"><![CDATA[Cubesat]]></kwd>
<kwd lng="es"><![CDATA[Diseño Estructural]]></kwd>
<kwd lng="es"><![CDATA[Impresión 3D]]></kwd>
<kwd lng="en"><![CDATA[CubeSat]]></kwd>
<kwd lng="en"><![CDATA[Structural Design]]></kwd>
<kwd lng="en"><![CDATA[3D Printing]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<label>[1]</label><nlm-citation citation-type="">
<collab>N. CubeSat Launch Initiative</collab>
<source><![CDATA[CubeSat 101: Basic Concepts and Processes for First-Time CubeSat Developers]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B2">
<label>[2]</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Camacho]]></surname>
<given-names><![CDATA[M. L.]]></given-names>
</name>
</person-group>
<source><![CDATA[Diseño e Implementación de la Estación Terrena UPB para Satélites Académicos Cubesats Trabajo Final de Grado]]></source>
<year>2022</year>
<publisher-name><![CDATA[Universidad Privada Boliviana, Facultad de Ingeniería y Arquitectura, Carrera de Ingeniería Electrónica y Telecomunicaciones]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B3">
<label>[3]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Bohorquez]]></surname>
<given-names><![CDATA[Y.]]></given-names>
</name>
</person-group>
<source><![CDATA[Diseño Conceptual y Preliminar de un Cubesat de Bajo Costo]]></source>
<year>2018</year>
</nlm-citation>
</ref>
<ref id="B4">
<label>[4]</label><nlm-citation citation-type="book">
<collab>W.-P. Air Force Base</collab>
<source><![CDATA[Design and Testing of an Additively Manufactured Cubesat Structural Bus]]></source>
<year></year>
<publisher-name><![CDATA[Air Force Institute Of Technology]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B5">
<label>[5]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Abelaira]]></surname>
<given-names><![CDATA[A. T.]]></given-names>
</name>
<name>
<surname><![CDATA[Karner]]></surname>
<given-names><![CDATA[SCD]]></given-names>
</name>
<name>
<surname><![CDATA[Daniel]]></surname>
<given-names><![CDATA[C.]]></given-names>
</name>
<name>
<surname><![CDATA[Kennedy]]></surname>
<given-names><![CDATA[J. F.]]></given-names>
</name>
</person-group>
<source><![CDATA[CubeESatS: Aproximaciones, desafíos y utilidades &#8218;La dificultad es una excusa que la historia nunca acepta]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B6">
<label>[6]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Napoli]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Papadopoulos]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
</person-group>
<source><![CDATA[The Use of Additive Manufacturing Technologies for the Design and Development of a Cubesat A project present to Master of Science in Aerospace Engineering]]></source>
<year>2013</year>
</nlm-citation>
</ref>
<ref id="B7">
<label>[7]</label><nlm-citation citation-type="">
<source><![CDATA[CubeSats y el desarrollo de la impresión 3D basada en el espacio]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B8">
<label>[8]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Chen]]></surname>
<given-names><![CDATA[Z.]]></given-names>
</name>
<name>
<surname><![CDATA[Zosimovych]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
</person-group>
<source><![CDATA[Mission Capability Assessment of 3D Printing Cubesats]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B9">
<label>[9]</label><nlm-citation citation-type="">
<source><![CDATA[La Agencia Especial Europea da a conocer los CubeSat, satélites 3D en miniatura - 3Dnatives]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B10">
<label>[10]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Lee]]></surname>
<given-names><![CDATA[Simon]]></given-names>
</name>
<name>
<surname><![CDATA[Hutputanasin]]></surname>
<given-names><![CDATA[Amy]]></given-names>
</name>
<name>
<surname><![CDATA[Toorian]]></surname>
<given-names><![CDATA[Armen]]></given-names>
</name>
<name>
<surname><![CDATA[Lan]]></surname>
<given-names><![CDATA[Wenschel]]></given-names>
</name>
<name>
<surname><![CDATA[Munakata]]></surname>
<given-names><![CDATA[Riki]]></given-names>
</name>
</person-group>
<source><![CDATA[CubeSat Design Specification Rev. 12 The CubeSat Program, Cal Poly SLO CubeSat Design Specification (CDS) Document Classification X Public Domain ITAR Controlled Internal Only CubeSat Design Specification Rev. 12 The CubeSat Program, Cal Poly SLO Change History Log Effective Date Revision Author Description of Changes]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B11">
<label>[11]</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Cruz Martínez]]></surname>
<given-names><![CDATA[E. F.]]></given-names>
</name>
<name>
<surname><![CDATA[Martínez Calzada]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Saldaña Heredia]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Diseño Estructural de un Nanosatélite Tipo Cubesat]]></article-title>
<source><![CDATA[Ingeniería: Ciencia, Tecnología e Innovación]]></source>
<year>2022</year>
<volume>9</volume>
<numero>1</numero>
<issue>1</issue>
<page-range>45-56</page-range></nlm-citation>
</ref>
<ref id="B12">
<label>[12]</label><nlm-citation citation-type="">
<source><![CDATA[Small Satellites, Big Impact: Sustainability in the Space Economy - New Space Economy]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B13">
<label>[13]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Pierlot]]></surname>
<given-names><![CDATA[Gauthier]]></given-names>
</name>
</person-group>
<source><![CDATA[Oufti-1 : flight system configuration and structural analysis]]></source>
<year>2009</year>
</nlm-citation>
</ref>
<ref id="B14">
<label>[14]</label><nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Nugent]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Munakata]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Chin]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Coelho]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Puig-Suari]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
</person-group>
<source><![CDATA[The CubeSat: The picosatellite standard for research and education]]></source>
<year>2008</year>
<conf-name><![CDATA[ Space 2008 Conference]]></conf-name>
<conf-loc> </conf-loc>
</nlm-citation>
</ref>
<ref id="B15">
<label>[15]</label><nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Cihan]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Cetin]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Kaya]]></surname>
<given-names><![CDATA[M. O.]]></given-names>
</name>
<name>
<surname><![CDATA[Inalhan]]></surname>
<given-names><![CDATA[G.]]></given-names>
</name>
</person-group>
<source><![CDATA[Design and analysis of an innovative modular cubesat structure for ITU-pSAT II]]></source>
<year>2011</year>
<conf-name><![CDATA[ 5th International Conference on Recent Advances in Space Technologies]]></conf-name>
<conf-loc> </conf-loc>
<page-range>494-9</page-range></nlm-citation>
</ref>
<ref id="B16">
<label>[16]</label><nlm-citation citation-type="">
<source><![CDATA[Vista de celdas fotovoltaicas de alta eficiencia y sistema de paneles solares del CubeSat Colombia 1]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B17">
<label>[17]</label><nlm-citation citation-type="book">
<source><![CDATA[Diseño y fabricación de una estructura para un CubeSat 1U]]></source>
<year></year>
<publisher-name><![CDATA[Universidad del Valle de Guatemala, Facultad de Ingeniería]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B18">
<label>[18]</label><nlm-citation citation-type="">
<source><![CDATA[Todo lo que siempre quisiste saber sobre la estructura de un CubeSat]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B19">
<label>[19]</label><nlm-citation citation-type="">
<source><![CDATA[Análisis de resistencia estructural en el diseño de un nanosatélite CubeSat]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B20">
<label>[20]</label><nlm-citation citation-type="">
<source><![CDATA[Impresión 3D Aeroespacial | Dassault Systèmes]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B21">
<label>[21]</label><nlm-citation citation-type="">
<source><![CDATA[Infografía: La impresión 3D en el espacio - 3Dnatives]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B22">
<label>[22]</label><nlm-citation citation-type="">
<source><![CDATA[La impresión 3D revoluciona el sector espacial - BSDI]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B23">
<label>[23]</label><nlm-citation citation-type="">
<source><![CDATA[La innovación de la impresión 3D en la carrera espacial]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B24">
<label>[24]</label><nlm-citation citation-type="">
<source><![CDATA[La revolución de la impresión 3D en la carrera espacial]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B25">
<label>[25]</label><nlm-citation citation-type="">
<collab>gagadget.com</collab>
<source><![CDATA[Los satélites estarán equipados con sensores de bajo coste impresos en 3D]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B26">
<label>[26]</label><nlm-citation citation-type="">
<source><![CDATA[El ingenioso método del MIT para tener satélites más baratos: sensores impresos en 3D]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B27">
<label>[27]</label><nlm-citation citation-type="">
<source><![CDATA[Planetary Resources utiliza la impresión 3D para sus proyectos de minería]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B28">
<label>[28]</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Tranfield]]></surname>
<given-names><![CDATA[D.]]></given-names>
</name>
<name>
<surname><![CDATA[Denyer]]></surname>
<given-names><![CDATA[D.]]></given-names>
</name>
<name>
<surname><![CDATA[Smart]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
</person-group>
<source><![CDATA[Towards a Methodology for Developing Evidence-Informed Management Knowledge by Means of Systematic Review]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B29">
<label>[29]</label><nlm-citation citation-type="">
<source><![CDATA[Comparativa entre el PLA, el ABS y el nylon]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B30">
<label>[30]</label><nlm-citation citation-type="">
<source><![CDATA[Material ABS: una guía de creación rápida de prototipos]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B31">
<label>[31]</label><nlm-citation citation-type="">
<source><![CDATA[PLA vs ABS vs PETG: Las Diferencias. - IDEA161]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B32">
<label>[32]</label><nlm-citation citation-type="">
<source><![CDATA[Todo sobre el Nylon (PA). Propiedades, Cómo Usar y las Mejores Marcas]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B33">
<label>[33]</label><nlm-citation citation-type="">
<source><![CDATA[PLA y PETG: características, diferencias y aplicaciones]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B34">
<label>[34]</label><nlm-citation citation-type="">
<source><![CDATA[Filamento ABS 750 gr para impresión 3D]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B35">
<label>[35]</label><nlm-citation citation-type="">
<collab>Alu-Stock S.A.</collab>
<source><![CDATA[Aluminio, Información técnica, historia y propiedades]]></source>
<year></year>
</nlm-citation>
</ref>
</ref-list>
</back>
</article>
