SciELO - Scientific Electronic Library Online

 
vol.39 número4Determinación de parámetros de secado por aspersión para la obtención de extracto seco rico en Saponinas de residuos de escarificado de QuinuaElectrodeposición de Dióxido de Manganeso Electrolítico en sustratos de Carbón a partir de Lixiviados de pilas Alcalinas agotadas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Revista Boliviana de Química

versão On-line ISSN 0250-5460

Resumo

CLAURE ZEBALLOS, Mauricio; PARDO TARIFA, Fatima L.; LOPEZ N, Luis G.  e  CABRERA M, Saúl. Mesoporous Silicoaluminate materials (MCM-41, SBA-15 and MCF) by atrane route for Cobalt Catalyst. Rev. Bol. Quim [online]. 2022, vol.39, n.4, pp.13-32. ISSN 0250-5460.  https://doi.org/10.34098/2078-3949.39.4.2.

In this work, the synthesis of mesoporous silicoaluminum supports synthesized by the atrane route was performed. The obtained supports presented high homogeneity of the aluminum dispersion, high surface area and narrow pore size distribution. The synthesized mesoporous supports were: MCM-41, SBA-15 and MCF with 10% of Al2O3 in the matrix of SiO2. Twelve percent of cobalt was added to these supports by the incipient wetness impregnation method. These materials were characterized by adsorption of Nitrogen (BET-BJH), Scanning Microscopy Electron (SEM), X-Ray Diffraction (XDR), H2 Temperature-Programmed Reduction (TPR) and NH3 Temperature-Programmed Desorption (TPD). According to their structural properties of these catalysts, a promising application in the Fischer- Tropsch syntheses (FTS) is identified.

Palavras-chave : Mesoporous silicoaluminate; MCM-41; SBA-15; MCF; catalyst support; Cobalt Catalyst.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )